Stainless Steel Lift Tables
Also hot dipped galvanised | For hostile environments, inc. chlorine | Totally enclosed box section | Bead blasted surface | Recommended for food industry use
Above: A specially built 1,200Kg capacity lift table with powered roller track.
It is made for the food industry from EN 1.4301 stainless steel (normal stainless steel 18/8).
General guide/information for stainless steel and galvanised tables
1. Complete stainless steel EN 1.44301 or EN 1.4401.
2. Standard cylinder tubes coated with corrosion resisting primer and spray coated with a 2 component acrylic resin paint finish, colour RAL 7032 grey. Piston rod of chrome plated stainless steel.
1. Completely from EN 1.4301 or EN 1.4401 stainless steel.
2. Combination of Stainless platform and bottom frame with hot dipped galvanised armset.
3. Hot dipped galvanised.
All axles and cylinder bolts of stainless steel and bearing bushes with grease points.
We recommend placing the power pack and control panel in a remote location or covering with a stainless steel hood.
An E12-125YSS special built lift table made from EN 1.4301 stainless steel with specially painted cylinders and chrome plated stainless steel rods. The lift control is by foot switch.
A number of 1,200Kg capacity lift tables being used in a process hall. The environment is extremely aggressive due to concentrated salt water sprays. The working height needs constant adjustment to prevent damage to the 'operators' backs as the loads are heavy and difficult to handle.