Stainless Steel Tables
|
-
Also hot dipped galvanised
-
For hostile environments, inc. chlorine
-
Totally enclosed box section
-
Recommended for food industry use
|
Above: A specially
built 1,200Kg capacity lift table with powered roller track.
It is made for the food industry from EN 1.4301 stainless steel
(normal stainless steel 18/8).
General guide/information for stainless steel and
galvanised tables
|
| Cylinder Type |
1. Complete stainless steel EN 1.44301
or EN 1.4401.
2. Standard cylinder tubes coated with corrosion resisting
primer and spray coated with a 2 component acrylic resin
paint finish, colour RAL 7032 grey. Piston rod of chrome
plated stainless steel.
|
| Fabrication |
1. Completely from EN 1.4301 or EN 1.4401 stainless
steel.
2. Combination of Stainless platform and bottom frame
with hot dipped galvanised armset.
3. Hot dipped galvanised.
|
| Bearings |
All axles and cylinder bolts of stainless steel and
bearing bushes with grease points. |
| Power Pack |
We recommend placing the power pack and control panel
in a remote location or covering with a stainless steel
hood. |
|
|
|
| An E12-125YSS special built lift table
made from EN 1.4301 stainless steel with specially painted
cylinders and chrome plated stainless steel rods. The lift
control is by foot switch. |
A number of 1,200Kg capacity lift tables
being used in a process hall. The environment is extremely
agressive due to concentrated salt water sprays. The working
height needs constant adjustment to prevent damage to the
operators' backs as the loads are heavy and difficult to handle. |
|
